Prevent fiberglass blistering with Interprotect 2000E.InterProtect 2000E is a unique two-part epoxy coating developed to protect new and used fiberglass hulls from water absorption, which can lead to poor hull performance and osmotic blistering. Formulated with Micro-plates that create an overlapping barrier to eliminate any direct path for water migration. In addition to use as a barrier coat, Interprotect 2000E is also an excellent fiberglass topside primer and great for underwater metals.Quart and Gallon Kits comprised of separate containers of base and reactor are offered. When mixed, kits yield either a quart or a gallon. We also offer, as separate purchases, short-pour” 3-gallon containers and separate containers of reactor, which when mixed, yield three full gallons. There are two low VOC formulations available, Interprotect 2000 VOC (898628) and Interprotect HS (15086606). Check your local air quality management district for compliance.Key FeaturesAdheres well to fiberglass, composite, metal and woodLong overcoating times add flexibility and versatility in a boatyard environmentCompatible with Interlux primers, antifoulings and Interfill fairing compoundsForms a barrier against water intrusionPhysical DataType: Multi-Purpose Two-Part Epoxy PrimerFinish: MatteAvailable Colors: Grey, White Components: 2Solids by Volume: 45%Coverage: 240sq.ft/gal.VOC: 464g/lApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: Varies with applicationWet Film Thickness/coat: 5.6 milsDry Film Thickness/coat: 2.6 milsApplication Temperature Min./Max. Range: 10C/50F--35C/95FThinner: Interlux 2316N (Model 198598)Drying Times* (Hours) Drying @41F @50F @73F @95F To touch